Description

2017 Ibis Mojo HD3 Carbon Mountain Bike Frame

Dropping in with accolades of HD heritage and rolling with modern touches designed for today’s riding styles, the 2017 Ibis Mojo HD3 Carbon Mountain Bike Frame carries over last year’s well-received updates into a new year. As with its predecessor, this HD3’s long, low geometry wrangles steep lines with glee, and its stiff boost axles bump up the volume to accommodate tires ranging from 2.3in speed demons to a plus-sized 2.8-inchers.

The Mojo HD3’s DW-Link suspension platform isolates rear wheel movement from pedaling and braking forces so you can expect a plush and linear suspension motion that feels like an even bigger bike, yet pedals on flats and climbs with the attitude of an XC machine. The 66.6-degree angle of the tapered head tube takes advantage of DW-Link’s solidity and the chassis’ stability to hit a steeper angle than most six-inch bikes. That means the Mojo HD3 digs into climbs with an aggressive front end that doesn’t leave you hanging when you’re dropping in for the descent.

The bike’s spine is built on stout, 16.9in chainstays and a low, 13.5in-high bottom bracket, which team with the aforementioned geometry for an uncommonly agile enduro sled that gets up and goes when the trail turns skyward or drops in fast when things point down, defying the categorizations that limit so many other bikes. As an added bonus, the shock tune and suspension keep the bottom bracket height at the sag point the same, no matter what size tire you choose to run.

The frame boasts clean internal cable routing and stealth routing for a dropper post of your choice. Ibis stands by threaded bottom brackets with the Mojo, a move that mercifully dismisses any proprietary press-fit systems in favor of a rock-solid standard that will last for ages. Dual-row angular contact bearings on the drive-side of the linkage require zero preload adjustment and dramatically reduce play compared to standard, sealed bearings, further bolstering the bike’s lateral solidity and your own sense of control.

Ibis’ ultimate enduro machine boasts 27.5+ versatility

6-inches of responsive DW-Link suspension

Long, slack geometry tackles bigger lines

Carbon construction reduces weight and increases stiffness

Removable derailleur mouint lets you choose gearing

Boost rear hub stiffens wheelsets

Compatible with tires ranging from 2.3 to 2.8in

2017 Ibis Mojo HD3 Carbon Mountain Bike Frame

Frame Material:

carbon fiber

Suspension:

DW-Link

Wheel Size:

27.5 in, 27.5+

Rear Shock:

Fox Factory FLOAT DPS 3pos w/ Adj and EVOL Sleeve with Kashima Coat

Rear Travel:

150mm

Head Tube Diameter:

ZS44/ZS56 mixed tapered

Headset Included:

no

Bottom Bracket Type:

68mm BSA threaded

ISCG Tabs:

yes, ISCG 05

Cable Routing:

internal

Front Derailleur Mount:

direct-mount removable

Brake Type:

post-mount disc

Seatpost Diameter:

31.6mm

Rear Axle:

12 x 148mm Boost thru-axle

Recommended Use:

all-mountain, enduro

Manufacturer Warranty:

7 years

2017 Ibis Mojo HD3 Carbon Mountain Bike Frame

GEOMETRY CHART